Roll Forming Machine

Product Details:

A 500 mm W Beam Roll Forming Machine is a specialized industrial machine used to produce W-beams, commonly referred to as wide flange beams or I-beams, which are a type of structural steel beam used in construction. These beams are primarily used in building frameworks, bridges, and other structural applications due to their strength and durability.

 

Product Details:

We are involved in manufacturing accurately CZ Purlin Roll Forming Machine. These products are mainly used for structural purposes in diverse industries. The entire range is fabricated using high-quality raw materials at our modern and well-equipped manufacturing facility. We have an ability to produce bulk needs of ceiling section of the customer within the specific time frame.
Entry Gate
Entry gate will be provided for movement of the sheet to roll former.

Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion
It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine
Each forming head consists of a fixed housing and sliding type outboard housing
The mill stands will be arranged to locate shafts mounted on taper bearing
For the top shafts, the bearings are housed in the cartridge type bearing block
The bottom shaft bearings are located in the bored machined in the housing
The bottom arbors are fixed in a position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts
The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive
The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

Tooling
One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply
The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above

Cutting Unit (Hydro)
Hydraulically operated power pack along with cutting die with 3 HP electrical.

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are Manufacturers and Suppliers of Wall Panel Forming Machine from Rajkot, Gujarat. Our Motto is to provide best quality material to our esteem customers. 

Product Details:

A 900 mm Punching Roll Forming Machine is a specialized piece of equipment used in the roll forming process, designed to produce profiles with a 900 mm width and incorporate punching operations during the forming process. This machine is used for creating a wide variety of metal profiles, such as roofing sheets, wall panels, and structural elements while simultaneously punching holes, slots, or other cutouts into the material.

Product Details:

An 800 mm Roll Forming Line Machine is an industrial machine designed to process metal coils into various profiles with a width of 800 mm. This machine uses the roll forming process, which involves passing metal through a series of rollers that progressively shape the material into the desired profile. The 800 mm width is commonly used for roofing sheets, wall panels, or other construction materials.

Product Details:

A 600 mm Metal Sheet Roll Forming Machine is an industrial machine designed to manufacture metal sheets with a 600 mm width through a roll forming process. This machine is used in a wide range of industries such as construction, roofing, and cladding, producing metal sheets with various profiles, including corrugated sheets, flat sheets, tile profiles, and more.

Product Details:

We are Manufacturers and Suppliers of Roll Forming Machine from Rajkot, Gujarat. Our Motto is to provide best quality material to our esteem customers. 

Product Details:

A 600 mm Cold Roll Forming Machine Line is a machine line used to process flat metal sheets into specific profiles through a cold roll forming process. This line typically produces products such as metal panels, channels, or other structural components used in construction, roofing, or other industrial applications. The 600 mm specification refers to the width of the metal sheets that the machine can process or the maximum width of the formed product.

Product Details:

We are Manufacturers and Suppliers of C Purline Z Purlin U Purline Machine from Rajkot, Gujarat. Our Motto is to provide best quality machine to our esteem customers. 

Product Details:

We are Manufacturers and Suppliers of Roll Forming Machine from Rajkot, Gujarat. Our Motto is provide best quality material to our esteem customers. 

Product Details:

We are Manufacturers and Suppliers of Roll Forming Machine from Rajkot, Gujarat. Our Motto is provide best quality material to our esteem customers.

Product Details:

A 500 mm Sheet Roll Forming Machine is a specialized piece of equipment used in the metal processing industry to produce metal sheets with a consistent profile, usually for roofing, cladding, or wall panel applications. The 500 mm refers to the width of the metal sheet that the machine can handle during the roll forming process. This machine forms the sheet into a particular shape while maintaining precision and efficiency.

Product Details:

A 500 mm Metal Sheet Roll Forming Machine is an industrial machine designed to produce metal sheets (often for roofing, cladding, or other structural applications) with a 500 mm width. This machine uses a roll forming process, where a continuous strip of metal is passed through a series of rollers to gradually shape it into the desired profile.

Product Details:

6 rib/ 1220 mm roofing  Machine is a specialized machine designed to produce roofing sheets with a 1220 mm width. This machine uses a roll forming process to transform metal coils into various types of roofing sheets, which are then used in the construction of both commercial and residential buildings. The 500 mm width is commonly used for creating corrugated sheets, tile profiles, or flat sheets, depending on the specific requirements of the project.

Additional Information:

• Production Capacity: 25 TON DAY
• Delivery Time: 30 TO 40 DAYS
• Packaging Details: WELL PACKED ALL EQUIPMENTS AND PARTS

Product Details:

The listing roll forming machines are designed for the production of the most commonly used supporting beams for building C shaped steel purlin & Z shaped steel purlins as well as solar panel mounting structure and cable tray. Both C&Z purlin roll forming machine are technically capable to produce 1 to 3 mm steel purlins and sometimes up to 5mm thickness required for special application. Punching holes are available. This C&Z purlin quick-change roll forming machine can produce C shaped steel purlin & Z shaped steel purlins, solar panel, cable tray profiles only by simple steps adjustment without changing rollers. Roll forming machine consist of a decoiler, feeding guide, punching rollers, leveling unit, roll forming unit, hydraulic punching device, hydraulic cutter, hydraulic pump and PLC base control system. Everything could be operated on the PLC control system with touch screen, such as required quantities, required lengths and require holes etc. This interchangeable C/Z purlin roll forming machine could produce both C & Z purlins with difference sizes automatically it takes 10-30 minutes to change the production, there is no need to change cutter for different sizes of C&Z steel purlins & Solar structure purlins because cutter is adjustable as well punching tools are assembled after roll forming and the distance is also adjustable.

Product Details:

An 800 mm Sheet Roll Forming Machine is a specialized machine used in the manufacturing process of metal sheets for roofing, cladding, and other industrial applications. The 800 mm refers to the width of the sheet that the machine can form, which is often used for wider panels in both residential and commercial construction projects.

Product Details:

Roll Forming Machine is a specialized industrial machine used to manufacture roofing sheets from metal coils such as galvanized steel, aluminum, pre-painted steel, and other materials. This machine is designed to produce high-quality roof panels with a 600 mm width, typically used for residential, commercial, and industrial roofing applications. 

• Aluminium Profile machine
• Bamboo Machine
• Corrugation Profile machine
• Double Layer Machine
• Ridge & Ridge Tile Machine
• Step Tile Machine
• Trapezoidal Profile Machine
• Wall Cladding Profile machine

Additional Information:

• Production Capacity: 25 TON PER DAY
• Delivery Time: 30 TO 45 DAYS
• Packaging Details: PACKED IN STRETCHED ROLLERS

Product Details:

A 400 mm Roll Forming Machine is an industrial machine designed to produce metal sheets, profiles, or components with a 400 mm width using a roll forming process. This machine is typically used in industries like construction, manufacturing, and steel production for making various profiles used in roofing, cladding, and other structural applications. The process involves passing a metal strip through a series of rollers to progressively shape the material into the desired profile.

Product Details:

Our Sheet Roll Forming Machine has high Precession quality. Although there are many suppliers for this machine and many machine factory produce this machine, our company is the is a qualified Producer, Highly Skilled Staff, After Sales Services. So our company is the best choice for you.

Entry Gate:

Entry gate will be provided for movement of the sheet to roll former.

Main Base:

The main base is MS fabricated structure and adequately ribbed to minimize the distortion

It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station):

The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine

Each forming head consists of a fixed housing and sliding type outboard housing

The mill stands will be arranged to locate shafts mounted on taper bearing

For the top shafts, the bearings are housed in the cartridge type bearing block

The bottom shaft bearings are located in the bored machined in the housing

The bottom arbors are fixed in a position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts:

The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive:

The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

Tooling:

One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply

The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above

Cutting Unit (Hydro):

Hydraulically operated power pack along with cutting die with 3 HP electrical.

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 25 ton
• Delivery Time: 60 days

Product Details:

Colour Coated Roofing Sheet Making Machine is a specialized industrial machine designed for producing Roofing sheets for industrial or residentials with a width of 12200 /1440 mm. These machines are widely used in the construction industry for manufacturing durable roofing materials that are essential for both residential and commercial buildings. The roll forming machine shapes metal sheets into roof sheets, often with profiles like trapezoidal, corrugated, or ribbed designs, offering both structural strength and aesthetic appeal.

Additional Information:

• Production Capacity: 25 ton per day
• Delivery Time: 30 to 45 days
• Packaging Details: well packed all equipmetns

Product Details:

We are Manufacturers and Suppliers of Roll Forming Machine from Rajkot, Gujarat. Our Motto is to provide best quality material to our esteem customers. Request
Callback 

Additional Information:

• Delivery Time: 35-50 Days

Product Details:

We take immense pride to introduce our company as one of the truthful manufacturers of Roofing Sheet Roll Forming Machine. A wide gamut of these machines is Producing by us by implementing world-class quality. we are offering you to this Roofing Sheet Roll Forming Machine in as per your requirement. Our Roll Forming Machine is widely appreciated by the customer all around the world due to smooth and constantly performance. Further, this Roofing Sheet Roll Forming Machine is Mostly used for manufacturing steel sheets that are used for the roofs of buildings

Entry Gate

• Entry gate will be provided for movement of the sheet to roll former.

Main Base

• The main base is MS fabricated structure and adequately ribbed to minimize the distortion
• It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

• The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine
• Each forming head consists of a fixed housing and sliding type outboard housing
• The mill stands will be arranged to locate shafts mounted on taper bearings
• For the top shafts, the bearings are housed in the cartridge type bearing blocks
• The bottom shaft bearings are located in the bored machined in the housings
• The bottom arbors are fixed in a position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

• The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

• The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

Tooling

• One set of Tooling with EN grade will be from an imported material suitable for your machine as standard supply
• The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with the final template for above.

Cutting Unit (Hydro)

• Hydraulically operated power pack along with cutting die with 3 HP electrical.

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are the Manufacturer of Metal Roof Tile Making Machine.Request
Callback 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 60 days

Product Details:

We are Manufacturers and Suppliers of Slitting Machine from Rajkot, Gujarat. Our Motto is to provide best quality machine to our esteem customers. Request
Callback 

Additional Information:

• Delivery Time:  2 Days

Additional Information:

• Delivery Time: 2 day

Product Details:

We offering you to an outstanding quality range of Roofing Roll Forming Machine. These Door Frame Making Machine can be customized as per customer requirement based. These Door Frame Roll Forming Machines are Mostly known for its stability and superiority. Our Door Frame Roll Forming Machines can be availed at best competitive rates.

Entry Gate:

Entry gate will be provided for movement of the sheet to roll former.

Main Base:

The main base is MS fabricated structure and adequately ribbed to minimize the distortion

It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station):

The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine

Each forming head consists of a fixed housing and sliding type outboard housing

The mill stands will be arranged to locate shafts mounted on taper bearings

For the top shafts, the bearings are housed in the cartridge type bearing blocks

The bottom shaft bearings are located in the bored machined in the housings

The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings

Roll shafts:

The roll shafts dia. 50 mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive:

The drive to the roll former will be by means of a gearbox system

The main drive will be provided by means of 3 HP motor

Tooling:

One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply

The same is involved in operations like rough machining, keyway, rough profiling, bore grinding, profile machining and inspection with final template for above

Cutting Unit:

Gearbox: ELECON

Motor: ABB

Bearing: SKF

Request
Callback

Additional Information:

• Production Capacity: 3 Ton Per Hour Or 25MPM
• Delivery Time: 30 Days

Product Details:

PPGI | PPGL | BGL | CG

Product Details:

Our Deck Channel Roll Forming Machine is offered as per your requirement. We are committed to providing quality machines for all customers with dedicated after-sales services.

Entry Gate

Entry gate will be provided for movement of the sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion

It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stand

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine

Each forming head consists of a fixed housing and sliding type outboard housing

The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts, the bearings are housed in the cartridge type bearing block

The bottom shaft bearings are located in the bored machined in the housing

The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housing

Roll shafts

The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

Tooling

One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply

The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above

Cutting Unit (Hydro)

Hydraulically operated power pack along with cutting die with 3 HP electrical.

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 60 days

Product Details:

Duplex Roll Forming Machine is a vertical member in the light frame construction techniques called balloon framing and platform framing of a building''s wall. Duplex Roll Forming Machine is the essential for its production.

Entry Gate:

Entry gate will be provided for movement of the sheet to roll former.

Main Base:

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station):

The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine

Each forming head consists of a fixed housing and sliding type outboard housing

The mill stands will be arranged to locate shafts mounted on taper bearing

For the top shafts, the bearings are housed in the cartridge type bearing block

The bottom shaft bearings are located in the bored machined in the housing

The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housing

Roll shafts:

The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive:

The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

Tooling:

One set of Tooling with EN grade will be from an imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with a final template for above.

Cutting Unit (Hydro):

Hydraulically operated power pack along with cutting die with 3 HP electrical.

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: any

Product Details:

We are one of the leading organization occupied in providing brilliant quality C Purlin Roll Forming Machine, which is producing by using the high-grade material. It was widely used in every corn worldwide. we can develop special C Purlin Roll Forming Machine as per customer requirement.

Entry Gate:

Entry gate will be provided for movement of the sheet to roll former.

Main Base:

The main base is MS fabricated structure and adequately ribbed to minimize the distortion

It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station):

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine

Each forming head consists of a fixed housing and sliding type out board housing

The mill stands will be arranged to locate shafts mounted on taper bearing

For the top shafts, the bearings are housed in the cartridge type bearing block

The bottom shaft bearings are located in the bored machined in the housing

The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housing

Roll shafts:

The roll shafts dia. 60mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive:

The drive to the roll former will be by means of a gearbox system. The main drive will be provided by means of 10 HP motor

Tooling:

One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply

The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above

Feeder:

Shaft Dia.: 60 mm

Inner: 200 mm

Material: EN 31

Motor H.P.: 1

Gearbox: 1

Punching Press:

Capacity: 20 ton

Motor H.P.: 3

Cutting Unit (Hydro):

Hydraulically operated power pack along with cutting die with 3 HP electrical.

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Z Purlin Roll forming is continuous bending operation in which a long strip of metal sheet (usually steel coils, like PPGI, PPGL, GI, PPGL, BGL, Aluminum etc.) passes through sets of rolls mounted on consecutives stand each set performing only an incremental part of the bend, until the desired cross-section profile is obtained. Roofing sheet roll forming machine consists of an automatic Decoiler feeding guide, roll forming unit, hydraulic cutter with PLC base control system.Request
Callback 

Additional Information:

• Item Code: JRPF
• Production Capacity: 18MPM
• Delivery Time: 90 Days
• Packaging Details: As Per Customer Requiter

Product Details:

Roll forming is continuous bending operation in which a long strip of metal sheet (usually steel coils, like PPGI, PPGL, GI, PPGL, BGL, Aluminum etc.) passes through sets of rolls mounted on consecutives stand each set performing only an incremental part of the bend, until the desired cross-section profile is obtained. Roofing sheet roll forming machine consists of an automatic Decoiler feeding guide, roll forming unit, hydraulic cutter with PLC base control system. We are involved in offering a wide array of color sheet making machine that is manufactured using high grade raw material and the latest technology with the set universal standards. These products are available in various specifications and can be customized as per variegated demands of our prestigious clients. Highest output speeds up you 30-40 meters per minute results in at least 10-15 times higher production. Maximum utilization of your investment practically any shape can be formed with uniform cross sections. Any complicated Shape Profile can be formed on our roll forming. Accuracy and consistency in Shape & dimension can be achieved. Reduced delivery period to meet your production needs quickly. We develop Roll Forming Line & Roll Tooling on our most modern software up grated with our enriched experience and technology. We have in-house CNC & VMC machining centers to produce roll tools with our own quality control and check.

Product Details:

No. of workstation : 24

<!-- /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {mso-style-unhide:no; mso-style-qformat:yes; mso-style-parent:""; margin-top:0cm; margin-right:0cm; margin-bottom:10.0pt; margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Arial",sans-serif; mso-fareast-font-family:Arial; mso-bidi-font-family:Shruti; mso-ansi-language:VI; mso-fareast-language:EN-US;} .MsoChpDefault {mso-style-type:export-only; mso-default-props:yes; font-family:"Calibri",sans-serif; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} @page WordSection1 {size:612.0pt 792.0pt; margin:72.0pt 72.0pt 72.0pt 72.0pt; mso-header-margin:36.0pt; mso-footer-margin:36.0pt; mso-paper-source:0;} div.WordSection1 {page:WordSection1;} /* List Definitions */ @list l0 {mso-list-id:1412000090; mso-list-type:hybrid; mso-list-template-ids:-107425718 -1 67698691 67698693 67698689 67698691 67698693 67698689 67698691 67698693;} @list l0:level1 {mso-level-number-format:bullet; mso-level-text:""; mso-level-tab-stop:none; mso-level-number-position:left; text-indent:-18.0pt;} @list l0:level2 {mso-level-number-format:bullet; mso-level-text:o; mso-level-tab-stop:none; mso-level-number-position:left; text-indent:-18.0pt; font-family:"Courier New";} @list l0:level3 {mso-level-number-format:bullet; mso-level-text:; mso-level-tab-stop:none; mso-level-number-position:left; text-indent:-18.0pt; font-family:Wingdings;} @list l0:level4 {mso-level-number-format:bullet; mso-level-text:; mso-level-tab-stop:none; mso-level-number-position:left; text-indent:-18.0pt; font-family:Symbol;} @list l0:level5 {mso-level-number-format:bullet; mso-level-text:o; mso-level-tab-stop:none; mso-level-number-position:left; text-indent:-18.0pt; font-family:"Courier New";} @list l0:level6 {mso-level-number-format:bullet; mso-level-text:; mso-level-tab-stop:none; mso-level-number-position:left; text-indent:-18.0pt; font-family:Wingdings;} @list l0:level7 {mso-level-number-format:bullet; mso-level-text:; mso-level-tab-stop:none; mso-level-number-position:left; text-indent:-18.0pt; font-family:Symbol;} @list l0:level8 {mso-level-number-format:bullet; mso-level-text:o; mso-level-tab-stop:none; mso-level-number-position:left; text-indent:-18.0pt; font-family:"Courier New";} @list l0:level9 {mso-level-number-format:bullet; mso-level-text:; mso-level-tab-stop:none; mso-level-number-position:left; text-indent:-18.0pt; font-family:Wingdings;} -->

 Min  & Max. Width of coil : 900 & 1500 mm

  Max. Thickness of coil   : 0.8 mm

   Min. Thickness of coil    : 0.3 mm

   Max. line speed  : 20 MPM

Additional Information:

• Production Capacity: 25 MT PER DAY
• Delivery Time: 30 TO 45 DAYS
• Packaging Details: PACKED BY STARCH ROLLERS AND NEEDED MATERIAL

Product Details:

A 25 mm Metal Sheet Cutting Machine is a specialized machine designed to cut metal sheets up to 25 mm in thickness. These machines are used in various industries, including construction, automotive, steel manufacturing, and fabrication, where precise cutting of metal sheets is required for creating components or parts for larger systems or structures.

Product Details:

We are among the leading names in the industry, engaged in Producing an exclusive range of Roofing Tile Roll Forming Machine. We have developed our machine as per the industry standards. Owing to their easy manufacturing process, excellent performance and effective solutions, these machines are widely appreciated.

Entry Gate:

Entry gate will be provided for movement of the sheet to roll former.

Main Base:

The main base is MS fabricated structure and adequately ribbed to minimize the distortion

It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stand

Mill stands (Station):

The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine

Each forming head consists of a fixed housing and sliding type outboard housing

The mill stands will be arranged to locate shafts mounted on taper bearings

For the top shafts, the bearings are housed in the cartridge type bearing blocks

The bottom shaft bearings are located in the bored machined in the housings

The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housing

Roll shafts:

The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive:

The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

Tooling:

One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply

The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above

Cutting Unit (Hydro):

Hydraulically operated power pack along with cutting die with 3 HP electrical.

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

A 400 mm Floor Decking Forming Machine is a type of machinery used in the production of floor decking materials, typically made from metal sheets. These machines are designed to create floor decking panels for use in construction projects, especially in multi-story buildings, industrial sites, and other large-scale developments.

 

Product Details:

Deck profile sheets, also known as metal decking sheets, are primarily used in construction as a structural component for floor and roof systems, particularly for composite slabs. They act as a formwork for concrete, reducing the need for concrete slabs and providing a working platform during construction , 

• Aluminium Profile machine , 
• Bamboo Machine , 
• Corrugation Profile machine
• Ridge & Ridge Tile Machine
• Step Tile Machine
• Trapezoidal Profile Machine
• Wall Cladding Profile machine

Additional Information:

• Production Capacity: 50 TON PER DAY
• Delivery Time: 60 TO 90 DAYS
• Packaging Details: WELL PACKED WITH ALL SPARE PARTS COVER BY STRETCHED ROLL

Product Details:

5 Ton Uncoiler Machine also known as a decoiler is a vital component in metal processing lines. Its primary role is to hold, support, and feed metal coils into downstream machines (like slitting lines, straighteners, or press machines) in a smooth, controlled manner.

Additional Information:

• Item Code: Uncoiler
• Delivery Time: 2 days

Product Details:

Additional Information:

• Production Capacity: 25 TON PER DAY
• Delivery Time: 60 TO 90 DAYS
• Packaging Details: WELL PACKED IN STRETCHED ROLLERS , PACKED IN BOXED AND NEEDFULL PACKING MATERIAL

Product Details:

Reidius Roll Forming manufacturing best quality Double Decker Roll Forming Machine in India also exporting worldwide. Most advanced yet simplest design and robust structure ensure precise performance, easy operation, and higher efficiency. These machines are available with 'manually' as well as 'automatically control' panel.

Entry Gate:

Entry gate will be provided for movement of sheet to roll former.

Main Base:

The main base is MS fabricated structure and adequately ribbed to minimize the distortion

It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station):

The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine

Each forming head consists of a fixed housing and sliding type outboard housing

The mill stands will be arranged to locate shafts mounted on taper bearings

For the top shafts, the bearings are housed in the cartridge type bearing blocks

The bottom shaft bearings are located in the bored machined in the housings

The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings

Roll shafts:

The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive:

The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

Tooling:

One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply

The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with a final template for above.

Cutting Unit (Hydro):

Hydraulically operated power pack along with cutting die with 3 HP electrical.

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are Manufacturers and Suppliers of Glazed Tile Roll Forming Machine from Rajkot, Gujarat. Our Motto is to provide best quality material to our esteem customers.